Reports say Samsung Electronics has identified the development path for next-generation DRAM
According to industry insiders on November 17, Samsung Electronics has recently finalized the development strategy for each generation of DRAM after D1c.
Previously, Samsung Electronics traded between "continuing to develop D1D using the existing architecture after D1c" and "shifting to a new architecture introducing wafer bonding technology." Ultimately, the company decided to advance the development of both types of products simultaneously, each corresponding to different application scenarios: D1d would be used for mainstream products like LPDDR, while D0A would be used for HBM5. Both products are planned to enter mass production in the second half of next year.
An industry insider said, "Samsung has decided to advance the development of both D1d and D0A simultaneously, but each targeting different application areas." ”
Traditional DRAM integrates the storage unit responsible for data storage with peripheral circuits that control its operation on the same wafer. In contrast, in the D0A architecture, memory cells and peripheral circuits are manufactured on their respective wafers and then combined using "wafer-to-wafer" bonding technology. By separating the storage units from peripheral circuits, the storage wafer space previously occupied by the peripherals can be used to accommodate more storage units. This allows more storage units to be integrated within the same area. Additionally, peripheral circuits can be independently optimized for higher performance without being constrained by the manufacturing process of the memory unit.
It is expected that "hybrid bonding" technology will be used to connect these two wafers. This technology can precisely align and bond the insulation layer and copper interconnection structure on the wafer surface, enabling two wafers to work together like a complete DRAM chip.
The D1d process for LPDDR will continue to use the traditional architecture. The memory cells and peripheral circuits will still be manufactured on the same wafer, and the storage unit area will continue to be based on the 6F² structure. Meanwhile, R&D work on 4F² DRAM will continue.
