Shenzhen Zhilian Weichuang Technology Co., Ltd.

Apple evaluates HMO technology for next-generation OLEDs, with sputtering process as a priority solution

Publication Date: 2026-11-04 Source:Electronic Engineering Album Key words: Apple OLED diode View count:

According to industry insiders on November 2nd, Apple is considering sputtering as the preferred deposition method for high mobility oxide (HMO) technology in the next generation of organic light-emitting diode (OLED) panels. Due to its ability to utilize existing production equipment and cost advantages, sputtering is considered by Apple as a more cost-effective solution beyond atomic layer deposition (ALD). However, the final mass production process has not yet been determined, and Samsung and LG monitors are still testing both technology routes simultaneously.


HMO technology is being considered for high-resolution OLED displays in future information technology products such as MacBook and iMac. At present, high-end OLED panels mainly use low-temperature polycrystalline silicon oxide (LTPO) technology, which combines silicon with oxide semiconductors. If the performance and reliability of HMO are significantly improved, some silicon processes are expected to be replaced by oxide technology, simplifying the manufacturing process and reducing panel production costs.


The goal of HMO is to improve the performance of thin film transistors (TFTs). TFT is responsible for controlling the on, off, and brightness of each pixel in OLED displays, and its electron mobility directly affects the panel driving capability. The electron mobility of traditional oxide TFTs is typically around 10 square centimeters per volt second, while HMOs aim to increase this indicator to 30 to 50 square centimeters per volt second. A higher electron mobility means that the device can provide a larger driving current, making it more suitable for high-resolution, high refresh rate display products.


Sputtering and atomic layer deposition can both be used to form semiconductor thin film layers for TFTs, but each has its own focus on cost and control accuracy. Sputtering uses plasma to bombard atoms from solid materials and deposit them onto the substrate surface. Its advantage is that it can reuse existing OLED production line equipment and reduce additional capital expenditures. However, in order to achieve both high electron mobility and high reliability, further optimization of material composition and thin film structure is still needed.


Atomic layer deposition utilizes gaseous precursors to form thin films layer by layer, allowing for more precise control of thickness and composition, which is beneficial for ensuring the electrical performance and stability of the device. The drawback of this process is that the equipment price and raw material cost are relatively high. For IT products that require controlling the manufacturing cost of large-sized panels, this is also an important reason for Apple and panel manufacturers to continuously evaluate sputtering solutions.


It is reported that Samsung Display is developing sputtering based HMO technology and evaluating atomic layer deposition processes, with a focus on whether it can achieve the required electron mobility and reliability on large-sized substrates. Before entrusting Samsung Display to evaluate the feasibility of applying this technology to the eighth generation large-area manufacturing process, Apple had already conducted an assessment of HMO related technology at its research and development center in Taiwan.


LG Display is developing sputtering based HMO technology on the sixth generation small and medium-sized OLED production line, and simultaneously conducting atomic layer deposition research. The company released an OLED prototype using atomic layer deposition to manufacture oxide TFTs last year, with an electron mobility of approximately 40 square centimeters per volt second, which has entered the HMO target range. However, considering the investment in new equipment, LG Display reportedly still tends to utilize existing sputtering equipment to advance technology development.


For HMOs, performance indicators during the laboratory phase do not necessarily equate to mass production performance. Even if the device reaches its target in the early stages of manufacturing, its electrical performance may change in subsequent processes or fluctuate after being exposed to heat or light. Therefore, whether the finished panel can maintain high electron mobility and stability in the long term is a core challenge faced by both deposition routes. Samsung monitors and LG monitors are testing the performance and reliability of different processes separately.


An industry insider stated that both panel manufacturers are prioritizing the development of sputtering technology while retaining research on atomic layer deposition. The latter has demonstrated performance advantages during the research phase, but cost factors make sputtering still a focus of further testing. The future mass production plan chosen by Apple will depend on the performance, long-term reliability, and overall manufacturing cost of HMO on large-sized substrates, rather than just individual technical indicators.