Domestic 24 bit stereo audio analog-to-digital conversion chip-CJC1808
The core of a 24 bit stereo audio ADC is the Sigma Delta architecture, which uses "time for precision" to achieve equivalent resolution far beyond traditional ADCs in the audio frequency band through oversampling, noise shaping, and digital filtering.
Working Principle:
Oversampling: Sampling at a rate much higher than the Nyquist frequency (usually 256-512 times) to disperse quantization noise energy over a wider frequency range and reduce noise density within the audio band.
Noise Shaping: The quantization noise in the low frequency band is "pushed" to the high frequency band through a feedback loop, and then filtered out by a digital filter. The higher the order of the modulator, the stronger the shaping effect (about 9dB/octave for the first order, about 15dB for the second order, and about 21dB for the third order).
Digital filtering and extraction: The output end uses a digital low-pass filter (such as a Sinc filter) to filter out out out of band noise, and extracts at an oversampling rate to recover a 24 bit standard audio sampling rate data stream (such as 48kHz/192kHz).

The CJC1808, represented by Gongcai.com, is a high-performance, low-cost, single-chip stereo analog-to-digital converter ADC chip that adopts a Δ - ∑ modulation architecture, supports 24 bit resolution, and has a high sampling rate of 96kHz; Its single ended analog input, on-chip digital anti aliasing filter, and high pass filter simplify the complexity of the audio front-end. It also supports master/slave mode switching, I2S, and left aligned data formats. Its operating voltage range is 2.7V to 3.6V; The 14 pin TSSOP package is suitable for audio devices with limited space. In addition, this chip can replace TI's PCM1808 pin to pin.
Compatibility and differences between CJC1808 and PCM1808:
Pin compatibility: CJC1808 and PCM1808 have the same pin definitions and can be directly replaced without modifying the PCB layout.
Interface compatibility: Supports the same IS and left aligned audio data formats, with consistent master-slave mode settings.
Clock system compatibility: All systems support clock inputs with 256/384/512 times sampling rate.
CJC1808 is a stereo ADC audio chip using delta sigma modulation technology, with a 64 fold oversampling rate, built-in digital extraction filter and high pass filter, which can effectively remove the DC component in the input signal; Supports two working modes, master mode and slave mode, and provides two serial audio interface data formats, providing excellent audio performance in the sampling rate range of 8kHz to 96kHz.
Typical application scenarios:

Analog to digital conversion chip - CJC1808 features:
High performance audio indicators:
-Dynamic Range (DR): 101dB (fs=48kHz)
-Signal to Noise Ratio (S/N): 101dB (fs=48kHz)
-Total harmonic distortion+noise (THD+N): -83dB (fs=48kHz, 0dB input)
-Channel separation degree: 92dB (fs=48kHz)
Flexible clock and interface:
-The system clock supports 256fs, 384fs, and 512fs
-Sampling rate range: 8kHz~96kHz
-Audio interface format: I2S (24 bits) or left aligned (24 bits)
-Master/slave mode optional, hardware pin configuration
Digital filter:
-Passband: 0.49fs
-Stopband: 0.57fs
-Passband ripple: ± 0.035dB
-Bandstop attenuation: -70dB
Power waste:
-Simulated power supply current (fs=48kHz): 15.1mA
-Digital power supply current (fs=48kHz): 1.38mA
-In power down mode, the analog current drops to 0.8mA and the digital current drops to 0.1mA
Power supply and packaging:
-Analog power supply (VCC): 2.7V~5.5V
-Digital power supply (VDD): 2.7V~3.6V
-Working temperature: -40 ° C~+85 ° C (industrial grade) or -20 ° C~+85 ° C (commercial grade)
-Package: 14 pin TSSOP
Application of ADC Chip CJC1808:
USB audio devices: such as USB microphones, external sound cards, and live audio interfaces.
Portable recording devices: digital recording pens, on-site recorders, conference recording systems.
Intelligent audio terminal: smart speaker, voice remote control, far-field voice acquisition board.
Industrial audio monitoring: machine fault monitoring, environmental noise analysis, and onboard recording for rail transit.
As a high-performance stereo audio ADC, CJC1808 focuses on accurately and efficiently converting analog audio signals into high-quality digital audio. It is an ideal front-end solution for applications that require high-quality audio capture, and can also serve as a domestic alternative to PCM1808. Its lower power consumption (2.7V~5.5V operating voltage) and higher cost-effectiveness make it the preferred choice for audio codec design.
