Shenzhen Zhilian Weichuang Technology Co., Ltd.

Application Of Intelligent Gas Meter

Control Module

一、Application Background And Core Requirements


Gas, as a compressible fluid, undergoes significant fluctuations in volume with changes in ambient temperature and pipeline pressure. Traditional gas meters that only measure operating volume have natural measurement deviations: every 1 ℃ change in ambient temperature and every 1kPa fluctuation in pressure can lead to 0.34% and 0.99% volume measurement errors, which can accumulate over the long term and directly cause the gas supply and sales gap to exceed the standard, affecting billing fairness and gas enterprise revenue.


At the same time, abnormal pipeline pressure is the earliest signal characteristic of safety hazards such as gas leaks and hose ruptures. Intelligent gas meters equipped with pressure sensors can upgrade from passive meter reading to active safety monitoring and accurate measurement, and are also the mandatory configuration direction for the implementation of the new national standard in the current gas meter industry.


c1693d5f-fb62-461e-ae3b-0450a7b065e5.png




二、Intelligent Gas Meter System Architecture


3.png




三、Typical Workflow


1. The sensing acquisition layer wakes up every 30 seconds to collect current gas pipeline pressure, temperature, and flow data.

2. After MCU reads the data, it calls the built-in algorithm to calculate the standard volume, and judges whether the pressure is within the normal range.

3. If the data is normal, update the local display data and cache the data for reporting; If abnormal pressure is detected, immediately trigger valve closure, local alarm, and prioritize reporting abnormal data to the cloud.

4. Regularly upload cached measurement data, pressure data, and equipment status data to the cloud through the communication module on a daily basis, and receive remote instructions to complete data synchronization.


Pressure sensor:

1、NS2727 low-power MEMS digital pressure sensor (temperature and pressure integrated model can simultaneously collect pressure and temperature), with a range covering the common pressure range of gas pipeline network (300hPa~1200hPa), absolute accuracy within ± 0.1hPar, supports I2C/SPI digital interface output, standby current as low as 0.5 μ A, built-in calibration parameters and temperature drift compensation algorithm, and adopts sealed anti-corrosion packaging for long-term stable operation in contact with gas medium.

2、NS2520 power MEMS digital pressure sensor (temperature and pressure integrated model can simultaneously collect pressure and temperature), with a range covering the common pressure range of gas pipeline network (300hPa~1200hPa), absolute accuracy within ± 0.1hPar, supports I2C/SPI digital interface output, standby current as low as 0.5 μ A, built-in calibration parameters and temperature drift compensation algorithm, and adopts metal sealed dust-proof small volume packaging.

3f3fbdbf-3cc0-4a28-a80c-c78d11a0a0b0.png